| References
Evolution of Simtec Flying Theater Systems
Starting from a visionary concept, Simtec evolved into a global leader in flying theater manufacturing with over 20 installations worldwide.
Read Article
Skip to Content

The FUNRIDE™ CCS is a fully enclosed motion ride system engineered for total immersion. Its controlled cabin environment allows motion, media, audio, and special effects to work together as one coherent experience.
Request now
FUNRIDE™ CCS is our closed cabin simulator for immersive media-based attractions, built on a configurable FUNRIDE™ motion ride platform. By controlling what guests see, hear and feel, the system creates a focused show environment where motion, media, audio, and special effects become part of a unified attraction experience.
The enclosed cabin allows stories, worlds, and environments to unfold without outside distractions, while configurable motion systems and show technologies provide the flexibility to support a wide range of attraction concepts.
Engineered with real simulation DNA, FUNRIDE™ CCS uses frame-accurate synchronization, refined motion cueing, and controlled dynamics to turn media into a ride guests truly feel.
The enclosed cabin creates a controlled visual and acoustic show environment, reducing external distractions and sound leakage into adjacent areas. Light, media, effects, and thematic design elements can be carefully orchestrated as one immersive attraction experience.
Different attraction concepts require different solutions. Cabin layouts, motion technologies, media systems, and theming options can be adapted to project-specific requirements.
4D elements such as wind, scent, water mist, and vibration are built into each seat and synchronized with motion and media — creating a consistent, powerful sensory impact for every passenger.
This browser does not support the video element.
Not every attraction is designed around scale, shared perspectives, or open sightlines. Some experiences are created for maximum immersion — where guests are drawn completely into a story, environment, or virtual world. FUNRIDE™ CCS was developed for this reality. Unlike the FUNRIDE™ OCS open cabin system, the FUNRIDE™ CCS concentrates the visual, acoustic, and physical show environment inside an enclosed cabin. Instead of competing with external influences, motion, media, audio, and special effects can be carefully synchronized to support the story being told and create a focused sense of immersion. Without external visual references competing for attention, motion can be perceived more naturally and integrated more closely into the experience.
For this experience to feel convincing, synchronization alone is not enough. Drawing on decades of expertise in certified flight simulation and attraction engineering, Simtec applies refined motion cueing and Motion Texture techniques to create believable movement, smooth transitions, and carefully balanced intensity. Combined with precise real-time synchronization across all show systems, this transforms media into an experience guests can physically feel.
Every attraction project comes with its own creative ambitions, operational requirements, and spatial constraints. Rather than forcing these requirements into a predefined layout, Simtec adapts the FUNRIDE™ CCS platform to the specific goals of each project.
Depending on the attraction concept, the system can be configured with different motion technologies, passenger capacities, seating or standing arrangements, media systems, and special effect packages. Interior design, lighting, finishes, and branding can be tailored to help transform the cabin into part of the attraction experience, supporting the intended story, theme or IP.
From early project stages, Simtec aligns building conditions, media integration, show systems, safety interfaces, and maintenance access to create one technically coherent attraction system designed for reliable long-term operation. For clients seeking a fully integrated delivery model, FUNRIDE™ CCS can also be supplied as a complete turnkey attraction. Simtec leads the system integration and takes the project through installation, commissioning, and operator and maintenance training. AV technology and film production are provided by selected partners under Simtec’s coordination.
Get in touch
The FUNRIDE™ CCS is a configurable closed-cabin simulator ride platform. Technical specifications are adapted to the attraction concept, passenger capacity, motion system, media environment, safety requirements, and venue conditions.
Configurable for 2 to 50 passengers per ride unit
Supports seated and standing configurations depending on the attraction concept and operational requirements
Entry and exit concepts can be adapted to support efficient loading and unloading procedures
Available with 3-DOF up to premium 6-DOF motion systems
Configurable with hydraulic or electric drive systems
Motion performance can be tailored to the selected motion system, passenger capacity, and attraction requirements
Engineered for believable, comfortable and media-synchronized motion
Developed in-house by Simtec using industrial PLC and safety control technology for ride automation, motion control, and system-wide synchronization
Synchronizes motion, media, audio, effects, and show systems with frame-accurate timing
Integrates into project-specific show control architectures
Operator panels support ride operation, system monitoring, start/stop functions, reset procedures, and emergency handling
Compatible with internal projection surfaces, LED displays, and other immersive media technologies
Wind, scent, vibration, low-frequency rumble, and water mist can be integrated directly into the passenger seating system
Interior design, lighting, finishes, and branding elements can be integrated to support project-specific themes and IPs
Active cabin ventilation supports fresh air supply and guest comfort during operation
Available as a complete turnkey attraction, combining the motion system, show control, and special effects with partner-supplied AV technology and film production
Designed in accordance with international ride standards, including EN 13814, ASTM F2291, and GB 8408
Integrated safety PLCs, certified safety functions, and redundant system architectures support safe attraction operation
Monitored seat belts or restraint bars are available
Supports step-free access and wheelchair-compatible configurations
Key structural components are engineered for 20+ years of operation under defined load and operating conditions
Have an idea, a specific requirement or a challenging space to work with? Talk to us about your project. We will connect you with the right specialist at Simtec.
Alexander Bresinsky
Director Business Development
Get in touch
Simtec is proud to have provided products and services to world-famous brands and companies.
Creative vision, technical feasibility, and operational reality all need to work together. At Simtec, we bring engineering teams, project experience, and a personal approach to collaboration together to develop ride solutions that meet the demands of both the attraction and its operators.
Our Ride Systems and Test Systems benefit from shared expertise in precision motion control, complex kinematics, and real-world motion data. This exchange of knowledge helps us engineer motion that feels right for the experience.
Our independent structure means close collaboration with experienced engineers and decision-makers. We take a personal, hands-on approach to projects, with the flexibility to develop solutions around your specific requirements.
Your concept defines the engineering approach. From custom motion systems and ride control to complete turnkey attractions with specialized partners, we develop and integrate solutions around the creative vision and technical requirements.
With teams in Germany, the USA, and China, we support international projects from engineering and commissioning to training and lifecycle services. Our approach considers operation, maintainability, and long-term system performance from the outset.
“Simtec turns vision into reality.”
Advent Allen Entertainment
Discover iconic ride projects where Simtec’s precision engineering meets world-class entertainment.
| References
Starting from a visionary concept, Simtec evolved into a global leader in flying theater manufacturing with over 20 installations worldwide.
Read Article
| References
Simtec engineered Europe’s first HEXaFLITE® mini flying theater at Odyssey Malta, bringing 6-DOF thrills to a tight architectural space.
Read Article
| References
Discover how Simtec built a giant 96-seat motion simulator for Wanda Movie Park to deliver high-capacity 4D disaster simulations.
Read Article
FUNRIDE™ CCS brings motion, media, audio, and special effects together in a controlled show environment where guests can leave the outside world behind and become part of the story. This closed cabin simulator ride combines configurable 3-DOF to 6-DOF motion technology with integrated projection or LED media systems, creating a focused experience that engages multiple senses.
From story-driven theme park attractions to science centers and branded experiences, FUNRIDE™ CCS adapts to different creative concepts and venue requirements. Its enclosed architecture allows designers to shape the visual, acoustic, and physical environment around the story, turning on-screen action into an experience guests can truly feel.
A closed cabin alone does not define the ride. What sets our approach apart is the engineering behind its motion. Drawing on decades of experience in certified flight simulation and high-precision industrial test systems, our teams bring expertise in refined motion cueing, controlled dynamics, and repeatability to themed entertainment. Motion is not simply an add-on, but engineered as a physically credible core of the experience.
As a simulator ride manufacturer, Simtec Systems combines this expertise with custom attraction engineering and optional turnkey simulator attraction delivery. We coordinate motion technology, show control, and special effects, with AV technology and film production provided by selected partners. Our systems are designed in accordance with international ride standards, including EN 13814, ASTM F2291, and GB 8408. With teams in Germany, the USA, and China, we support international projects through engineering, commissioning, and lifecycle services.
Get in touch